 |
|
4200 Verdant StreetSuite A. Los Angeles, CA 90039 USA Tel (818) 241–0519 Fax (818) 548–5257 Web:- www.bynubar.com E-mail:- Noubar@bynubar.com COSMETICS 1 3 0 G
==SECTION I - MANUFACTURER IDENTIFICATION ==
MANUFACTURER'S Nubar Cosmetic Products
ADDRESS : 4200 Verdant St. Suite A, Los Angeles, CA 90039 USA
EMERGENCY PHONE : 1-800-424-9300 DATE PRINTED : 9/22/2008
INFORMATION PHONE : 818-241-0519
NAME OF PREPARER : Environmental
Department
Chemtrec's EMERGENCY TELEPHONE NUMBER 1-800-424-9300 is to be used "only in the event of chemical DATE: 7/3/2008
General MSDS
DATE: 9/27/2007
M A T E R I A L S A F E T Y D A T A S H E E T
ALL SHADES 3 FREE Page: 1
PRODUCT NAME: ALL SHADES 3 FREE HMIS CODES: H F R P
PRODUCT CODE: NUBAR emergencies involving a spill, leak, fire, exposure, or accident involving chemicals"
CHEMTREC MSDS GROUP #: 1
CHEMICAL NAME: NAIL LACQUER
TRADE NAME: FINISHED NAIL LACQUER
CHEMICAL FAMILY: NITROCELLULOSE LACQUER
== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION ==
VAPOR PRESSURE WEIGHT
REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT
---------------------------------------------------
BUTYL ACETATE 123-86-4 8.4 20øC 40.0% - 50.0%
TLV/PEL: 150 PPM
ETHYL ACETATE 141-78-6 76 20øC 20.0% - 30.0%
TLV/PEL: 400 PPM
NITROCELLULOSE 9004-70-0 10.0% - 20.0%
NO OCCUPATIONAL EXPOSURE LIMITS ESTABLISHED BY OSHA, ACGIH, OR NIOSH.
ISOPROPYL ALCOHOL 67-63-0 44 20øC 5.0% - 10.0%
TLV/PEL: 400 PPM
* Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
-Components in this product have been verified as being on the TSCA Inventory and has been classified in accordance with the hazard criteria of the CPR and all information required.-
THIS PRODUCT CONTAINS NO CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND/OR BIRTH DEFECTS AND/OR OTHER REPRODUCTIVE HARM.
== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ==
BOILING RANGE: 171øF - 228øF SPECIFIC GRAVITY (H2O=1): 7.745 lb/gl
VAPOR DENSITY: Heavier than air EVAPORATION RATE: (M - BUTYL ACETATE =
1): > 1.0
COATING V.O.C.: 2.21 lb/gl MATERIAL V.O.C.: 2.21 lb/gl
SOLUBILITY IN WATER: Moderate
APPEARANCE AND ODOR: Colored viscous liquid with sweet ester odor.
== SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==
M A T E R I A L S A F E T Y D A T A S H E E T
ALL SHADES 3 FREE Page: 2
FLASH POINT: 24øF METHOD USED: TCC
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 1.7 UPPER: 12.7
EXTINGUISHING MEDIA: Water is the most effective fire extinguishing medium for
Nitrocellulose. It is reccomended to be used in large volume. Dry chemical, CO2
or a universal type foam could be used to extinguish small fires.
SPECIAL FIREFIGHTING PROCEDURES Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Use water spray
to keep fire-exposed containers cool.
UNUSUAL FIRE AND EXPLOSION HAZARDS Handle as flammable liquid. Vapors form an explosive mixture in air between the upper and lower explosive limits which
can be ignited by many sources such as pilot lights, open flames, electrical motors and switches
== SECTION V - REACTIVITY DATA ==
STABILITY: Stable
CONDITIONS TO AVOID Flame, electric spark, static, and heat.
INCOMPATIBILITY (MATERIALS TO AVOID) This product is incompatible with strong acids or bases and oxidizers.
HAZARDOUS DECOMPOSITION OR BYPRODUCTS Thermal decomposition in the presence of air may yield carbon monoxide, carbon dioxide, and nitrogen oxide. Under some
conditions, methane, irritating aldehydes and carboxylic acids and hydrogen cyanide may be formed.
HAZARDOUS POLYMERIZATION: WILL NOT OCCUR.
== SECTION VI - HEALTH HAZARD DATA ==
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE Breathing high concentrations of vapors or mists may cause irritation of the nose and throat. Signs of nervous system
depression (e.g., drowsiness, dizziness, loss of coordination, and fatigue).
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE EYE: This product may cause eye irritation. Direct contact with this material or exposure to its vapors or mists
(greater than approximately 1000 ppm) may cause burning, tearing, redness, and swelling.
SKIN: This product may cause skin irritation. Prolonged or repeated exposure to this material may cause redness and
burning, drying and cracking of and dermatitis.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE Ingestion of excessive quantities may cause irritation of the digestive tract. Sign of nervous system depression (e.g.,
drowsiness, dizziness, loss of coordination, and fatigue).
HEALTH HAZARDS (ACUTE AND CHRONIC) No ingredient present in this product is identified as a carcinogen or probable carcinogen by NTP, IARC, or OSHA.
Reports have associated repeated and prolonged occupational overexposure to solvent present in this product with permenant brain and nervous system damage (sometimes referred to as solvent or painter's syndrome). Intentional misuse
by deliberately concentrating and inhaling this product may be harmful or fatal.
M A T E R I A L S A F E T Y D A T A S H E E T
ALL SHADES 3 FREE Page: 3
CARCINOGENICITY: NTP CARCINOGEN: No IARC MONOGRAPHS: No OSHA REGULATED: No
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE Respiratory symptoms associated with pre-existing lung disorders (e.g., asthma-like conditions) may be aggravated by
exposure to the vapors of this material. Persons with pre-existing skin disorders may be more susceptible to the effects of this material.
EMERGENCY AND FIRST AID PROCEDURES -Inhalation: In case of irritation by vapor, remove from exposure, treat symptomatically, and get medical attention if symptoms persist. -Eyes: Any material that contacts the eye should be washed out immediately and medical attention
obtained if symptoms persist. -Skin: Wash with soap and plenty of water. -Ingestion: Call a physician or poison control center immediately. Induce vomiting as directed by medical personnel. Never give anything by mouth to an unconscious person.
== SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE ==
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED Highway or railway spills call CHEMTREC 1 (800) 424-9300 cont. U.S. Collect (202) 483-7616 from Alaska and Hawaii. Stay upwind and away from spill. Keep all sources of ignition and hot metal surfaces away from spill. Keep out of drains, sewers, or waterways. Use sand or other inert material to dam and contain spill. Do not flush with water; use absorbent pads. For large spills call response team and notify appropriate state/local agencies. Immediately notify the National Response Center (phone number: 800-424-8802) in case if the spill is in excess of EPA reportable quantity.
WASTE DISPOSAL METHOD Dispose of product in accordance with local, county, state, and federal regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING Use non-sparking utensils when handling this material. Keep containers, tightly closed, cool, dry and away from
sources of ignition.
OTHER PRECAUTIONS Smoking in area where this material is used should be strictly prohibited. Use with adequate ventilation. If normal ventilation is not adequate use with NIOSH approved respirator or exhaust fan.
== SECTION VIII - CONTROL MEASURES ==
PREVENTATIVE MEASURES: Keep containers and storage containers closed when not in use. Do not store near heat, sparks, flame, or strong oxidents. While transferring this material the containers used in this process has to be effectively grounded
(ultimately to an earth ground) to prevent fire or explosion risk from static accumulation in accordance with the National Fire Protection Association standard for petroleum products.
RESPIRATORY PROTECTION When vapor concentration exceed the established exposure limits respiratory protection is necessary. Depending on the airbourne concentration, use a respirator or gas mask with appropriate cartridges and canisters (NIOSH approved organic vapor) or supplied air equipment.
VENTILATION
M A T E R I A L S A F E T Y D A T A S H E E T
ALL SHADES 3 FREE Page: 4
The ventilation system should be designed to be able to maintain airborne concentrations below the established exposure limits. If the current ventilation is not adequate to maintain this level, additional ventilation or exhaust systems may be required. Use explosion proof equipment.
PROTECTIVE GLOVES The use of gloves impermeable to the specific material handled is advised to prevent skin contact and possible irritation.
EYE PROTECTION Safety glasses with side shields (or goggles) are recommended for any type of industrial chemical handling.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT The use of gloves impermeable to the specific material handled is advised to prevent skin contact and possible irritation. Use splash goggles (NIOSH approved) to safeguard against potential eye contact, irritation or injury.
WORK/HYGIENIC PRACTICES Minimize breathing vapor or mist. Avoid prolonged or repeated contact with skin. Maintain a source of clean water to be available in work area for flushing eyes and skin. Remove contaminated clothing; launder or dry-clean before use. Remove contaminated shoes and thoroughly clean and dry before reuse. Cleanse skin thoroughly after contact, before breaks and meals, and at end of work period. Product is readily removed from skin by waterless hand cleaners or
solvents (acetone or esters) followed by washing with soap and water. Impervious clothing should be worn as needed.
==SECTION IX - SHIPPING INFORMATION== Proper Shipping Name: Paint
DOT Hazard Class: 3 (Flammable Liquid)
Packaging Group: PG II
UN ID Number: 1263
== SECTION X - DISCLAIMER ==
To the best of our knowledge, the information contained herein is accurate, obtained from sources believed by Nubar to be accurate. As with all chemicals, KEEP AWAY FROM CHILDREN AND ANIMALS.
FOR TOPICAL USE ONLY.
|
